What is a barrel screw?
Apr 15, 2025
The barrel screw is an important part of the injection molding machine, mainly used for conveying, compacting, melting, stirring and pressing plastics. All of this is done by rotating the screw in the tube. When the screw rotates, the plastic will produce friction and mutual movement between the inner wall of the tube, the bottom of the screw groove, the advancing surface of the screw edge, and the plastic and the plastic. The advancement of the plastic is the result of this combination of movement, and the heat generated by friction is also absorbed, thereby increasing the temperature of the plastic and melting it. The design structure of the screw will directly affect the extent of these effects.
Characteristics of the barrel screw: The compression section is long, accounting for 50% of the total length of the screw. The energy conversion is moderate during the plasticization process, and it is mainly used for plastics with poor thermal stability, such as PVC.
Characteristics of the barrel screw: The compression section is short, accounting for about 5%~15% of the total length of the screw, and the energy conversion is intense during the plasticization process. It is mainly used for crystalline plastics such as polyolefins and PA.
Characteristics of the screw: The adaptable screw can be used to process various plastics.
Generally, the screw of an injection molding machine can be divided into a feed section, a compression section, and a homogenization section (also called a metering section). (Note: Different screws have different ratios of the three sections, different screw groove depths, and different screw bottom diameter transition forms)
(1) Description of the feed section: This section has a fixed depth of spiral grooves, and its function is to preheat, convey, and push plastic solids. It is necessary to ensure that the plastic begins to melt at the end of the feed section.
(2) Description of the compression section: This section is the depth of the spiral groove of the conical screw, and its function is to melt, mix, shear, and compress the plastic raw materials, and exhaust under pressure. The plastic will completely dissolve in this section and the volume will shrink. The design of the compression ratio is very important.
(3) Description of the homogenization section: This section is a spiral groove with a fixed groove depth. Its main functions are mixing, glue delivery, and metering. It also provides sufficient pressure to maintain a uniform temperature of the glue melt and a stable flow of the molten plastic.







